HP2000 58-060
A pigmented 100% acrylic latex containing a fungicidal agent to inhibit mildew growth on the surface of the coating.
Intended Uses
A high performance int/ext pearl latex finish. Suitable for use on new drywall, primed surfaces, institutional areas, moisture & condensation areas and where a very durable finish is required.
Applications Directions
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Spreading Rate (Gal): 27-36 m²/3.7L (290-390 ft²/3.7L)
Drying Time: Touch 30Mins, Handle 2Hrs, Recoat: 4 Hrs
Tools:
Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.
Application / Dilution: Up to 5% water if spraying
Clean-up: Water
Additional Information
Gloss Level: Pearl (60°: 10 to 25) & (85°: 30 to 50 )
Composition: Binder: 100% Acrylic
VOC Level: <150g/L
Extra Features:
*MPI #139 Approved
Size & Bases:
Gallon – Available (White Only)
Pail: Available (White Only)
