Envirogard 15-210

A fast drying, tough, non-yellowing interior/exterior Eggshel,Semi-Gloss and Gloss coating suitable for architectural, institutional and industrial service including moderately corrosive environments. Performs well on concrete, masonry, vinyl siding and suitably prepared and/or primed drywall, wood work, and metal. For use in Hospitals, Schools, Public buildings, Pulp and paper mills & Petro chemical plants. Provides a much tougher, more durable finish than conventional latex and alkyd finishes. Due to its exceptional adhesion, it can be used as a self prime finish on most non-porous substrates.

Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.

Spreading Rate (Gal): 27-36 m²/3.7L (290-390 ft²/3.7L)

Drying Time: Touch 30Mins, Handle 2Hrs, Recoat: 4 Hrs

Tools:
Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.

Application / Dilution: Ready to use / Up to 5% water if spraying

Clean-up: Water (Final rinse with Acetone)

Gloss Level: Semi-Gloss (60°: 37 to 53)

Composition: Binder: 100% Acrylic

VOC Level: <150g/L

Extra Features:
*Self prime finish on most non-porous areas
*Removed tape immediately after painting
*MPI #153 & 163 Approved

Size & Bases:
Gallon – All bases (White, Deep, Accent, Clear)
Pail: Bases Available (White, Deep, Accent)