Hi-Hide Eggshell 55-120

A quick drying hi-hide eggshell latex finish for interior use on drywall and other prepared surfaces. Provides a durable finish for architectural service in hallways, living and dining rooms, and other areas where a flat finish would be difficult to maintain. Not suitable where excess moisture occurs (e.g., bathrooms). Ideally suited for new construction to achieve a two coat finish on new drywall. Has spatter free application properties.

Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.

Spreading Rate (Gal): 30-40 m²/3.7L (320-430 ft²/3.7L)

Drying Time: Touch 30Mins, Handle 2Hrs, Recoat: 4 Hrs

Tools:
Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.

Application / Dilution: Ready to use / Up to 5-10% water if spraying

Clean-up: Water

Gloss Level: Eggshell (60°: 0 to 10 & 85°: 12 to 22 )

Composition: Binder: Polyvinyl Acrylic

VOC Level: <50g/L

Extra Features:
*Ideally suited for new construction to achieve a two coat finish on new drywall.
*MPI #44 Approved
*VOC are <50g/L

Size & Bases:
Gallon – Bases Available (White & Deep Only)
Pail – Bases Available (White & Deep Only)