

Breeze 70-010
A high quality, 100% acrylic latex pigmented to give a flat finish, rich satin finish and semi-gloss finish.
Intended Uses
A quick drying, weather-resistant finish for exterior wood, stucco and masonry. Intended for use on most exterior vertical surfaces, which can be used for low temperature applications (2°C). No primer required on Concrete and Masonry.
Applications Directions
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Spreading Rate (Gal): 25-33 m²/3.7L (265-355 ft²/3.7L)
Drying Time: Touch 1Hrs, Handle 2Hrs, Recoat: 4 Hrs
Tools:
Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Up to 10% water if spraying
Clean-up: Water
Additional Information
Gloss Level: Flat (60°: 2 to 5 & 85°: 0 to 5 )
Composition: Binder: 100% Acrylic
VOC Level: <100g/L
Extra Features:
*Can be applied at 2°C
*MPI #10 Approved
*No primer required on Concrete & Masonry.
Size & Bases:
Quart – All bases (White, Deep, Accent, Clear & Black)
Gallon – All bases (White, Deep, Accent, Clear & Black)
Pail – All bases (White, Deep, Accent, Clear & Black)