Baseline 60-224
A heavy-bodied, water-reducible, latex coating, containing pigments and fillers with VOC levels less than 50 g/l.
Intended Uses
A surface filler specifically designed to fill voids and reduce texture on concrete, concrete block and other types of masonry. For interior and exterior use.
Applications Directions
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Spreading Rate (Gal): 12-19 m²/3.7L (130-200 ft²/3.7L)*Rough Bock to Smooth Concrete
Drying Time: Touch 2Hrs, Handle 4Hrs, Recoat: 8Hrs
Tools:
Brush: Nylon or Polyester
Roller:15-30 mm
Spray: Tip .021-.035 in.
Application / Dilution: Ready to use / Do not thin
Clean-up: Water
Additional Information
Gloss Level: Flat (60°: 0 to 5%)
Composition: Binder: Acrylic/Polyvinyl
VOC Level: <50g/L
Extra Features:
*MPI #4 Approved
*Spray or roller application on porous block should be followed by brushing to work the material into the voids.
Size & Bases: Pail – Bases Available (White Only)
