Product Description: A high quality acrylic vehicle combined with suitable pigments.
Intended Uses: A fast drying latex primer for use on non-porous interior surfaces such as plastic, previously painted wood or metal surfaces, vinyl wall coverings, glass and various factory finishes which often present recoating problems.
Gloss Level: Flat (60°: 1 to 5)
Composition: Binder: Acrylic
Spreading Rate (Gal): 27-36 m²/3.7L (290-380 ft²/3.7L)
Drying Time: Touch 30Mins, Handle 2Hrs, Recoat: 3 Hrs
Tools: Brush: Nylon or Polyester
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Up to 10% water if spraying
VOC Level: <200g/L
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Size & Bases: Quart – Bases Available (White Only)
Gallon – Bases Available (White Only)
Pail – Bases Available (White Only)
Extra Features: *MPI #17 Approved. *Allow 24 hrs. if top coating with an alkyd or industrial finish.