Product Description: A top of the line quality epoxy-acrylic based product designed to prepare new and previously painted concrete in order to produce a superior surface for application of a coating.
Intended Uses: A high quality, water-reducible, latex coating. An exterior concrete sealer with exceptional adhesion qualities that resists alkali on concrete and masonry up to pH 13.0
Gloss Level: Flat (60°: 0 to 5%)
Composition: Binder: Acrylic/Polyvinyl
Spreading Rate (Gal): 9-33 m²/3.7L (100-350 ft²/3.7L)*Rough Bock to Smooth Concrete
Drying Time: Touch 8Hrs, Handle 8-12Hrs, Recoat: 12 Hrs
Tools: Brush: Nylon or Polyester
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Do not thin
VOC Level: <50g/L
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Size & Bases: Pail – Bases Available (White Only)
Extra Features: *Spray or roller application on porous block should be followed by brushing to work the material into the voids.