Description

Tradesman 28-400

Product Description: A professional quality latex paint formulated with titanium dioxide and inert pigments.
Intended Uses: A durable professional quality, interior vinyl acrylic finish for uses on ceilings, walls, and trim of primed plaster, wallboard,wood masonry, and primed metal. Designed for new construction or renovation.
Gloss Level: Flat 0-5 units @ 85 degrees
Composition: Binder: Vinyl Acrylic
Spreading Rate (Gal): 27-36 m²/3.7L (290-390 ft²/3.7L)
Drying Time: Dry times at 21ºC / 70ºF and 50% R.H.:
To Touch: 15 to 30 minutes
To Handle: 1 hour
To Overcoat: 4 hours minimum
Tools: Brush, Roller, Air Spray or Airless
Spray: Airless Tips: .017″ – .021″, Pressure: 2000 psi
Application / Dilution: Ready to use / Up to 5% water if spraying
Clean-up: Water (Final rinse with Acetone)
VOC Level: (less exempt solvents): <50g/L; 0.42lb/gal.
Surface Preparation: Surfaces must be clean, dry and free from dust, grease, mildew and wax. Remove any loose and
peeling paint and repair with patching compound. Prime as required below. Surface repairs should be spot primed.
New Drywall: Seal with a latex drywall sealer.
New Wood: Prime with a latex wood primer.
Previously Painted Surfaces: Glossy surfaces should be sanded to a dull finish or primed with a latex primer to provide good adhesion.
Metal and Other Surfaces: Consult your GP Paint Professional.