Porch & Floor 43-010

An Int/Ext gloss coating for properly prepared wood or concrete porches, steps, decks and floors. This advanced waterborne alkyd blend has been fortified with polyurethane ensuring to provide a finish that is very tough, abrasion and water resistant.

Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity.Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.

Spreading Rate (Gal): 26-34 m²/3.7L (280-370 ft²/3.7L)

Drying Time: Touch 1Hrs, Handle 4Hrs, Recoat: 24 Hrs

Tools:
Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.

Application / Dilution: Ready to use / Up to 5-10% water if spraying

Clean-up: Water (Final rinse with Mineral Spirits)

Gloss Level: Gloss (60°: 6 to 12)

Composition: Binder: Alkyd Resin, Fortified with Polyurethane

VOC Level: <100g/L

Extra Notes & Exterior Application: Wood must have a moisture content below 18%. Concrete must have a moisture content below 12%. Concrete should cured 30 days minimum (including repairs); treat surfaces with a solution of muriatic acid & water, rinse and let dry 2-3 days to dry after washing. (Surface should feel like 120 grit sandpaper). Reduce first coat 10-15% and apply second coat full strength.

Extra Features:
*MPI #60 Approved
*2 Factory Greys available in gallons

Size & Bases: Gallon – Bases Available (White, Accent and 2 Factory Greys)