Baseline 60-051
A pigmented latex emulsion.
Intended Uses
A sealer for plaster, drywall and interior masonry and concrete surfaces. Specially formulated with high opacity for use over unbleached drywall. Ideal for use under flat or low sheen latex’s.
Applications Directions
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Spreading Rate (Gal): 24-31 m²/3.7L (250-340 ft²/3.7L)
Drying Time: Touch 30Mins, Handle 2Hrs, Recoat: 4 Hrs
Tools:
Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Up to 5% water if needed
Clean-up: Water
Additional Information
Gloss Level: Flat (60°: 1 to 5)
Composition: Binder: Acrylic
VOC Level: Certification:Yes<50g/L
Extra Features:
*MPI #50 Approved.
*Not recommended under alkyd eggshell and semi-gloss finishes without an undercoat.
Size & Bases:
Quart – Bases Available (White Only)
Gallon – Bases Available (White Only)
Pail – Bases Available (White Only)
