Baseline 60-028
A professional quality latex sealer formulated with titanium dioxide and inert pigments.
Intended Uses
A latex sealer for new drywall. Designed to provide exceptionally high hiding power combined with efficient sealing properties. Ideal for new construction where a two coat finish is required, and the finish coat is a low sheen product.
Applications Directions
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Spreading Rate (Gal): 22-30 m²/3.7L (240-320 ft²/3.7L)
Drying Time: Touch 30Mins, Handle 2Hrs, Recoat: 3 Hrs
Tools:
Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Up to 5% water if needed
Clean-up: Water
Additional Information
Gloss Level: Flat (60°: 1 to 5)
Composition: Binder: Acrylic
VOC Level: <150g/L
Extra Features:
*MPI #50 Approved.
*Not recommended for use under higher sheen finishes.
Size & Bases:
Gallon – Bases Available (White Only)
Pail – Bases Available (White Only)
