Product Description: A fast drying waterborne acrylic resin pigmented with inert pigments.
Intended Uses: Quick drying int/ext primer with exceptional sealing, adhesion and stain killing/blocking properties. Recommended for use on drywall, plaster, hardboard, masonry, previously painted interior walls, wood ceilings & trim. Will block stains, seal surfaces and provide excellent adhesion on most substrates.
Gloss Level: Flat (60°: 1 to 5)
Composition: Binder: 100% Acrylic
Spreading Rate (Gal): 28-38 m²/3.7L (300-410 ft²/3.7L)
Drying Time: Touch 40Mins, Handle 1Hrs, Recoat: 2 Hrs
Tools: Brush: Nylon or Polyester
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Thinning Not required
VOC Level: <100g/L
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Size & Bases: Quart, Gallon, Pail - Bases Available (White Only)
Extra Features: *Some stains may require two coats to cover. *Exceptional adhesion on non-pourous areas. *MPI #17,39,134,137 Approved