Product Description: Light fast pigments dispersed in a modified acrylic latex.
Intended Uses: A quick drying, densely pigmented latex stain for exterior smooth or rough siding, shakes, shingles and fencing. Ideally suited for new or previously stained wood, which can be used for low temperature application.
Gloss Level: Low Sheen(60°: 5 to1 5)
Composition: Binder: 100% Acrylic
Spreading Rate (Gal): 20-27 m²/3.7L (220-290 ft²/3.7L)
Drying Time: Touch 1Hrs, Handle 2Hrs, Recoat: 4 Hrs
Tools: Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .011-.015 in.
Application / Dilution: Ready to use / Up to 10% water if spraying
Clean-up: Water
VOC Level: <100g/L
Surface Preparation: Surfaces must be clean, dry and free from dust, grease, mildew and wax. Remove any loose and peeling paint. Ensure all joints and seams are filled with a paintable caulking to prevent moisture ingress. Surface repairs should be spot primed.
Size & Bases: Gallon - Bases Available (White,Deep,Clear)
Pail - Bases Available (White,Deep,Clear)
Extra Features:*Do not use on roofs or decks. *Not recommended over previously painted areas. *Brushing is preferred. *MPI#16 Approved
Product Description: A 100% acrylic latex pigmented and tinted with light-fast colours. Product contains a mildewcide to inhibit mildew growth. Formulated to provide a uniform colour on wood while enhancing the wood grain.
Intended Uses: This stain provides a tough durable finish on all types of wood decks including paintable pressure treated lumber. The cured film has good resistance to water, sunlight & mildew, flaking and peeling, will resist cracking, when applied to properly prepared surface. May also be used on other wood surfaces such as siding, fencing and patio furniture.
Gloss Level: Flat (60°: 2 to 5)
Composition: Binder: 100% Acrylic
Spreading Rate (Gal): 35-52 m²/3.7L (370-560 ft²/3.7L)
Drying Time: Touch 1Hrs, Handle 2Hrs, Recoat: 4 Hrs
Tools: Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .011-.015 in.
Application / Dilution: Ready to use / Not required
Clean-up: Water
VOC Level: <100g/L
Surface Preparation: Wood Surface must be clean, dry and free from dust, grease, mildew and wax. Remove any loose and peeling stain. Uncoated and weathered wood should be sanded or treated chemically to remove any dead wood fibres or mill glaze prior to application of the stain.
Size & Bases: Gallon - Bases Available (White,Deep,Clear)
Extra Features: *Brushing is preferred *Allow 24 hours before light foot traffic, 7 days before replacing heavy furniture
Product Description: A self priming stain & sealer made of an alkyd & acrylic latex blend. To be used on new or previously stained wood surfaces.
Intended Uses: A blend offering the superior penetration and adhesion properties of an oil based primer and the long lasting durability of a 100% acrylic. Protects exterior new wood, weathered wood or previously painted or stained wood surfaces. Recommended for wood siding, fences, trim and outdoor furniture.
Gloss Level: Eggshell (60°: 5 to1 5)
Composition: Binder: 100% Acrylic/Alkyd Resin
Spreading Rate (Gal): 26-34 m²/3.7L (275-365 ft²/3.7L)
Drying Time: Touch 2Hrs, Handle 4Hrs, Recoat: 4 Hrs
Tools: Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .009-.013 in.
Application / Dilution: Ready to use / Up to 5% water if spraying
Clean-up: Water (Final rinse with Mineral Spirits)
VOC Level: <150g/L
Surface Preparation: Wood must be clean, dry (less than 15% moisture content) and free from dust, grease, mildew and wax. Previously painted or stained surfaces should be prepared by removing all flaking or peeling paint. Surface must be completely dry prior to applying the stain. New wood should be kiln dried or allowed to season for 2 to 4 weeks prior to the application of the product. If the wood is weathered or if mill glaze is present an appropriate cleaner should be used or remove the mill glaze and/or dead wood fibres. If applying a light colour to previously uncoated redwood or cedar, a tannin blocking primer should be applied prior to topcoating.
Size & Bases: Gallon - Bases Available (White,Deep,Clear)
Pail - Bases Available (White,Deep,Clear)
Extra Features: *Do not use on roofs or decks. Not recommended over glossy areas. *Brushing is preferred
Product Description: An acrylic / alkyd hybrid blend designed to penetrate and protect wood. (30 Standard Semi Transparent Colours)
Intended Uses: A decorative and protective water repellent stain finish for exterior wood. Semi-Transparent Stain enhances the natural beauty of the wood. The pigmentation provides protection from the ultra violet light while maintaining the natural colour. Widely used by producers of pre-finished siding. Contains a wax to aid in the repelling of water and durability.
Gloss Level: Low Sheen(60°: 5 to1 5)
Composition: Binder: 100% Acrylic/Alkyd Resin
Spreading Rate (Gal): 16-23 m²/3.7L (170-250 ft²/3.7L)
Drying Time: Touch 4Hrs, Handle 8Hrs, Recoat: 8 Hrs
Tools: Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .011-.015 in.
Application / Dilution: Ready to use / Not required
Clean-up: Water (Final rinse with Mineral Spirits)
VOC Level: <100g/L
Surface Preparation: Wood must be clean, dry (less than 12% Moisture) and free from dust, grease, mildew and wax and not previously painted or varnished. If the wood is weathered or if mill glaze is present an appropriate cleaner should be used or remove the mill glaze and/or dead wood fibres.
Size & Bases: Gallon - Translucent / Natural Finish
Pail - Translucent / Natural Finish
Extra Features: *Stir thoroughly before and during use. *Brushing is preferred. *(30 Standard Semi Transparent Colours)