MSDS Sheet (ENG)
MSDS Sheet (FR)
Product Description: An advanced waterborne alkyd fortified with polyurethane and containing durable light fast pigments.
Intended Uses: An Int/Ext gloss coating for properly prepared wood or concrete porches, steps, decks and floors. This advanced waterborne alkyd blend has been fortified with polyurethane ensuring to provide a finish that is very tough, abrasion and water resistant.
Gloss Level: Gloss (60°: 6 to 12)
Composition: Binder: Alkyd Resin, Fortified with Polyurethane
Spreading Rate (Gal): 26-34 m²/3.7L (280-370 ft²/3.7L)
Drying Time: Touch 1Hrs, Handle 4Hrs, Recoat: 24 Hrs
Tools: Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Up to 5-10% water if spraying
Clean-up: Water (Final rinse with Mineral Spirits)
VOC Level: <100g/L
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity.Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Extra Notes & Exterior Application: Wood must have a moisture content below 18%. Concrete must have a moisture content below 12%. Concrete should cured 30 days minimum (including repairs); treat surfaces with a solution of muriatic acid & water, rinse and let dry 2-3 days to dry after washing. (Surface should feel like 120 grit sandpaper). Reduce first coat 10-15% and apply second coat full strength.
Size & Bases: Gallon - Bases Available (White, Accent and 2 Factory Greys)
Extra Features: *MPI #60 Approved * 2 Factory Greys available in gallons
MSDS Sheet (ENG)
MSDS Sheet (FR)
Product Description: A modified acrylic latex, pigmented to dry as a tough, water resistant, flexible finish.
Intended Uses: A tough flexible coating for new or previously painted wood or concrete floors, porches and stairs. May also be used as a top coat or to freshen up decks or floor surfaces previously coated with Hypalon or Latex Spantex Deck Coating.
Gloss Level: Low Luster "Eggshell"(60°: 6 to 12)
Composition: Binder: 100% Acrylic
Spreading Rate (Gal): 33-43 m²/3.7L (350-470 ft²/3.7L)
Drying Time: Touch 1Hrs, Handle 2Hrs, Recoat: 4 Hrs
Tools: Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Up to 10-15% for sealing porous substrates
Clean-up: Water
VOC Level: <100g/L
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Extra Notes & Exterior Application: Wood must have a moisture content below 18%. Concrete must have a moisture content below 12%. Concrete should cured 30 days minimum (including repairs); treat surfaces with a solution of muriatic acid & water, rinse and let dry 2-3 days to dry after washing. (Surface should feel like 120 grit sandpaper). Reduce first coat 10-15% and apply second coat full strength.
Size & Bases: Gallon - Bases Available (White, Accent and 2 Factory Greys)
Extra Features: *Non slip additive or non slip tape might be required * 2 Factory Greys available in gallons