Product Description: A high quality, 100% acrylic latex pigmented to give a flat finish, rich satin finish and semi-gloss finish.
Intended Uses: A quick drying, weather-resistant finish for exterior wood, stucco and masonry. Intended for use on most exterior vertical surfaces, which can be used for low temperature applications (2°C). No primer required on Concrete and Masonry.
Gloss Level: Flat (60°: 2 to 5 & 85°: 0 to 5 )
Composition: Binder: 100% Acrylic
Spreading Rate (Gal): 25-33 m²/3.7L (265-355 ft²/3.7L)
Drying Time: Touch 1Hrs, Handle 2Hrs, Recoat: 4 Hrs
Tools: Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Up to 10% water if spraying
Clean-up: Water
VOC Level: <100g/L
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Size & Bases: Quart - All bases(White,Deep,Accent,Clear & Black)
Gallon - All bases(White,Deep,Accent,Clear & Black)
Pail - All bases(White,Deep,Accent,Clear & Black)
Extra Features: *Can be applied at 2°C *MPI #10 Approved *No primer required on Concrete & Masonry.


MSDS Sheet
Product Description: A high quality, 100% acrylic latex pigmented to give a flat finish, rich satin finish and semi-gloss finish.
Intended Uses: A quick drying, weather-resistant acrylic latex for exterior wood, stucco and masonry. Intended for use on most exterior vertical surfaces, which can be used for low temperature applications(2°C). No primer required on Concrete and Masonry.
Gloss Level: Eggshell (60°:10 to 30 & 85°: 30 to 50 )
Composition: Binder: 100% Acrylic
Spreading Rate (Gal): 25-33 m²/3.7L (265-355 ft²/3.7L)
Drying Time: Touch 1Hrs, Handle 2Hrs, Recoat: 4 Hrs
Tools: Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Up to 10% water if spraying
Clean-up: Water
VOC Level: <100g/L
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Size & Bases: Gallon - All bases (White,Deep,Accent,Clear)
Pail - All bases(White,Deep,Accent)
Extra Features: *Can be applied at 2°C *No primer required on Concrete & Masonry.
Product Description: A high quality, 100% acrylic latex pigmented to give a flat finish, rich satin finish and semi-gloss finish.
Intended Uses: A quick drying, extremely weather-resistant finish for most exterior vertical surfaces. Has better long term flexibility than alkyds and lower dirt pick-up than flat finishes. May be applied over aged alkyd, latex stain or paint, which can be used for low temperature application(2°C). No primer required on Concrete and Masonry.
Gloss Level: Semi-Gloss (60°: 50 to 70)
Composition: Binder: 100% Acrylic
Spreading Rate (Gal): 24-33 m²/3.7L (260-350 ft²/3.7L)
Drying Time: Touch 1Hrs, Handle 2Hrs, Recoat: 4 Hrs
Tools: Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Up to 10% water if spraying
Clean-up: Water
VOC Level: <100g/L
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Size & Bases: Quart - All bases (White,Deep,Accent,Clear)
Gallon - All bases (White,Deep,Accent,Clear)
Pail - All bases (White,Deep,Accent,Clear)
Extra Features: *Can be applied at 2°C #MPI #11 Approved *No primer required on Concrete & Masonry.