Product Description: A high opacity pigmented latex undercoat designed for professional painters.
Intended Uses: A interior undercoat for new drywall for use under a flat or low sheen eggshell finish.
Gloss Level: Flat (60°: 1 to 5)
Composition: Binder: Acrylic
Spreading Rate (Gal): 23-32 m²/3.7L (250-340 ft²/3.7L)
Drying Time: Touch 1Hrs, Handle 2Hrs, Recoat: 4 Hrs
Tools: Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.019 in.
Application / Dilution: Ready to use / Up to 5-10% water if needed
Clean-up: Water
VOC Level: <50g/L
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Size & Bases: Gallon - Bases Available (White Only)
Pail - Bases Available (White Only)
Extra Features: Not recommended on previously painted surfaces, or for use under an alkyd or a pearl, semi-gloss or gloss latex topcoat.
Product Description: A professional quality latex sealer formulated with titanium dioxide and inert pigments.
Intended Uses: A latex sealer for new drywall. Designed to provide exceptionally high hiding power combined with efficient sealing properties. Ideal for new construction where a two coat finish is required, and the finish coat is a low sheen product.
Gloss Level: Flat (60°: 1 to 5)
Composition: Binder: Acrylic
Spreading Rate (Gal): 22-30 m²/3.7L (240-320 ft²/3.7L)
Drying Time: Touch 30Mins, Handle 2Hrs, Recoat: 3 Hrs
Tools: Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Up to 5% water if needed
Clean-up: Water
VOC Level: <150g/L
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Size & Bases: Gallon - Bases Available (White Only)
Pail - Bases Available (White Only)
Extra Features: *MPI #50 Approved. *Not recommended for use under higher sheen finishes.
Product Description: A pigmented latex emulsion.
Intended Uses: A sealer for plaster, drywall and interior masonry and concrete surfaces. Specially formulated with high opacity for use over unbleached drywall. Ideal for use under flat or low sheen latex's.
Gloss Level: Flat (60°: 1 to 5)
Composition: Binder: Acrylic
Spreading Rate (Gal): 24-31 m²/3.7L (250-340 ft²/3.7L)
Drying Time: Touch 30Mins, Handle 2Hrs, Recoat: 4 Hrs
Tools: Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Up to 5% water if needed
Clean-up: Water
VOC Level: Certification:Yes<50g/L
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Size & Bases: Quart - Bases Available (White Only)
Gallon - Bases Available (White Only)
Pail - Bases Available (White Only)
Extra Features: *MPI #50 Approved. *Not recommended under alkyd eggshell and semi-gloss finishes without an undercoat.
Product Description: A pigmented latex emulsion formulated to near zero VOC levels (10 Intended Uses: A sealer for interior plaster, drywall, masonry and concrete. Suitable for use under all types of latex finishes. Has excellent hold-out.
Gloss Level: Flat (60°: 1 to 5)
Composition: Binder: Acrylic
Spreading Rate (Gal): 21-29 m²/3.7L (220-310 ft²/3.7L)
Drying Time: Touch 30Mins, Handle 2Hrs, Recoat: 4 Hrs
Tools: Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Up to 10% water if needed
Clean-up: Water
VOC Level: Certification:Yes<10g/L
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Size & Bases: Gallon - Bases Available (White Only)
Pail - Bases Available (White Only)
Extra Features: *MPI #50 and MPI #149 Approved. *Near zero VOC levels (10
Product Description: A high quality acrylic vehicle combined with suitable pigments.
Intended Uses: A fast drying latex primer for use on non-porous interior surfaces such as plastic, previously painted wood or metal surfaces, vinyl wall coverings, glass and various factory finishes which often present recoating problems.
Gloss Level: Flat (60°: 1 to 5)
Composition: Binder: Acrylic
Spreading Rate (Gal): 27-36 m²/3.7L (290-380 ft²/3.7L)
Drying Time: Touch 30Mins, Handle 2Hrs, Recoat: 3 Hrs
Tools: Brush: Nylon or Polyester
Roller:10-13 mm
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Up to 10% water if spraying
Clean-up: Water
VOC Level: <200g/L
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Size & Bases: Quart - Bases Available (White Only)
Gallon - Bases Available (White Only)
Pail - Bases Available (White Only)
Extra Features: *MPI #17 Approved. *Allow 24 hrs. if top coating with an alkyd or industrial finish.
Product Description: A top of the line quality epoxy-acrylic based product designed to prepare new and previously painted concrete in order to produce a superior surface for application of a coating.
Intended Uses: A high quality, water-reducible, latex coating. An exterior concrete sealer with exceptional adhesion qualities that resists alkali on concrete and masonry up to pH 13.0
Gloss Level: Flat (60°: 0 to 5%)
Composition: Binder: Acrylic/Polyvinyl
Spreading Rate (Gal): 9-33 m²/3.7L (100-350 ft²/3.7L)*Rough Bock to Smooth Concrete
Drying Time: Touch 8Hrs, Handle 8-12Hrs, Recoat: 12 Hrs
Tools: Brush: Nylon or Polyester
Roller:15-20 mm
Spray: Tip .013-.017 in.
Application / Dilution: Ready to use / Do not thin
Clean-up: Water
VOC Level: <50g/L
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Size & Bases: Pail - Bases Available (White Only)
Extra Features: *Spray or roller application on porous block should be followed by brushing to work the material into the voids.
Product Description: A heavy-bodied, water-reducible, latex coating, containing pigments and fillers with VOC levels less than 50 g/l.
Intended Uses: A surface filler specifically designed to fill voids and reduce texture on concrete, concrete block and other types of masonry. For interior and exterior use.
Gloss Level: Flat (60°: 0 to 5%)
Composition: Binder: Acrylic/Polyvinyl
Spreading Rate (Gal): 12-19 m²/3.7L (130-200 ft²/3.7L)*Rough Bock to Smooth Concrete
Drying Time: Touch 2Hrs, Handle 4Hrs, Recoat: 8Hrs
Tools: Brush: Nylon or Polyester
Roller:15-30 mm
Spray: Tip .021-.035 in.
Application / Dilution: Ready to use / Do not thin
Clean-up: Water
VOC Level: <50g/L
Surface Preparation: Surfaces must be clean, dry & free from dust, grease, mildew & wax. Remove any loose & peeling paint and repair with patching compound. New Wood or Drywall: Seal bare surface with appropriate Latex, Hybrid or Alkyd primer for better uniformity. Previously Painted Areas: Glossy surfaces should be sanded to a dull finish or prime with an appropriate primer to provide good adhesion.
Size & Bases: Pail - Bases Available (White Only)
Extra Features: *MPI #4 Approved *Spray or roller application on porous block should be followed by brushing to work the material into the voids.